Important Information

We are running very low of 3mm birch plywood stock and will not be getting anymore delivered for the foreseeable future due to supply and cost issues, please do not place large orders for this product without prior agreement or your order may be cancelled. As an alternative we would recommend using 4mm poplar plywood as this is the closest wood we have

We're now closed, but we're open again on Friday at 10:00 am

Laser Cleaner Pro

What is Laser Cleaner Pro

Laser Cleaner Pro is a specialist cleaner designed and made by Laser Supplies, it is the only type of cleaner out there made specifically for laser machines. It can be used on almost all parts of the machine except the running’s and electricals. Also available is accessories that can be used with the cleaner or get it all in one with our start kit. Suitable for all makes and models, for cleaning instructions please read below

Shop today

How to use Laser Cleaner Pro

Preparing the laser machine

  1. Shut down and unplug your laser machine.
  2. Sweep down as much dust from machine as possible; using a small handheld brush or vacuum

Preparing the solution

  1. Always protect your skin when using any sort of cleaning product – We recommend our latex gloves.
  2. Mix your solution – As this is a highly concentrated product we recommend a ratio of 50:1 (50 part waters:1 part Laser Pro Cleaner). Mix the solution into a trigger spray plastic bottle – this is easiest using a funnel. For tough stains / dirt we recommend a more concentrated solutions of 10:1 (10 parts water:1 part Laser Pro Cleaner)

Cleaning the machine

  1. Remove the bed bars from the machine. We recommend laying the bars on a large piece or cardboard to protect the bars and floor.
  2. Using the trigger bottle spray the cleaner across the bars and leave to soak – for tough stains / dirt we recommend you leave for upto 30 minutes
  3. Wipe of the cleaner using a scourer – repeatedly rinse and wiping.
  4. Clean the sidebars – For everyday dirt and dust, simply spray and wipe. For a heavy build up scrub with a scourer

From £12.99

1L Concentrated Cleaner - with 2 pairs of free gloves

View product
Untitled design

About our materials

We stock a full range of material including Wood, Acrylic and Mylar ranges cover 0.4mm upto 18mm. Acrylic is available in solid colours, translucent, mirror, frosted, duo and pastel. We are growing our range each and every day so please do get in touch if you can’t find what you are looking for

See how we do it

Why choose Lasersupplies?


We offer nationwide delivery, with most orders dispatched within 1 working day


Available from our Washington workshop Monday-Friday

Customer Service

Customer Service
Our experts on hand to assist with enquiries

Cutting service

Cutting service
Our state of the art equipment allows us to cut to order, if you can't see the size you require please ask


From acrylics, to wood we have a huge range in stock


Bulk discounts apply across all products

Laser Cleaner Pro has been added to your basket, proceed to checkout?